Renesas RX100 Series User Manual page 743

RX13T Group
TEIE Bit (Transmit End Interrupt Request Enable)
This bit is used to enable or disable transmit end interrupt (TEI) requests when the ICSR2.TEND flag is set to 1. An TEI
interrupt request is canceled by setting the TEND flag or the TEIE bit to 0.
TIE Bit (Transmit Data Empty Interrupt Request Enable)
This bit is used to enable or disable transmit data empty interrupt (TXI) requests when the ICSR2.TDRE flag is set to 1.
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
2
24. I C-bus Interface (RIICa)
Page 743 of 1041