D/A Converter For Generating Comparator C Reference Voltage (Da); Overview - Renesas RX100 Series User Manual

RX13T Group
27.

D/A Converter for Generating Comparator C Reference Voltage (DA)

27.1

Overview

This MCU includes one channel of 8-bit D/A converter. This D/A converter is used for generating comparator C
reference voltage.
Table 27.1 lists the specifications of the 8-bit D/A converter and Figure 27.1 shows a block diagram of the 8-bit D/A
converter.
Table 27.1 Specifications of 8-Bit D/A Converter
Item
Resolution
Output channels
Low power consumption function
DA0 (To comparator C)
DADR0: D/A data register 0
DACR: D/A control register
Figure 27.1 Block Diagram of 8-Bit D/A Converter
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
27. D/A Converter for Generating Comparator C Reference Voltage (DA)
Specifications
8 bits
One channel
Module stop state can be set.
AVCC0
VCC
Vref
AVSS0
8-bit
D/A
DA0
Module data bus
Control circuit
DADPR: Data register format select register
Internal
peripheral
bus
Page 883 of 1041