ADTRAN AOS Version R10.1.0 Command Reference Manual page 1183

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
ipv6 access-list standard <ipv6 acl name>
Use the ipv6 access-list standard command to create an empty IPv6 access control list (ACL) and enter
the Standard ACL Configuration mode. Use the no form of this command to delete an extended ACL and
all the entries contained in it.
For a complete list of all standard IPv6 ACL configuration commands, refer to the
Access Control Policy Command Set on page
Syntax Description
<ipv6 acl name>
Default Values
By default, all AOS security features are disabled, and there are no configured IPv6 ACLs.
Command History
Release 18.1
Functional Notes
This command only creates an empty standard IPv6 ACL, it does not configure it. For additional standard
IPv6 ACL configuration commands and configuration parameters, refer to the
Command Set on page
Usage Examples
The following example creates a standard IPv6 ACL Allowv6 and enters the Standard ACL Configuration
mode:
(config)#ipv6 access-list standard Allowv6
(config-std6-nacl)#
Technology Review
IPv6 ACLs are used as packet selectors by different IPv6 AOS features (firewall, virtual private network
(VPN), quality of service (QoS)); by themselves they do nothing. ACLs are composed of an ordered list of
entries with an implicit deny all at the end of each list. An ACL entry contains two parts: an action (permit
or deny) and a packet pattern. A permit ACL is used to match packets (meeting the specified pattern) to
enter the router system. A deny ACL advances AOS to the next access policy entry. AOS provides two
types of ACLs: standard and extended. Standard ACLs match based on the source of the packet.
Extended ACLs match based on the source and destination of the packet.
ACLs are performed in order from the top of the list down. Generally, the most specific entries should be at
the top and the more general at the bottom.
60000CRG0-35E
Specifies the name of the IPv6 ACL.
Command was introduced.
3192.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
3192.
IPv6 Access Control Policy
IPv6
1183

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents