ADTRAN AOS Version R10.1.0 Command Reference Manual page 1188

Command Reference Guide Global Configuration Mode Command Set
ipv6 dhcp database local
Use the ipv6 dhcp database local command to enable the Dynamic Host Control Protocol version 6
(DHCPv6) database. The DHCPv6 database stores local DHCPv6 bindings, allowing Internet Protocol
version 6 (IPv6) addresses assigned by the DHCPv6 server to be stored in non-volatile random access
memory (NVRAM) and preserved across a reboot of the AOS unit. Using this command enables the local
database to begin storing DHCPv6 information. Use the no form of this command to disable the DHCPv6
database.
Syntax Description
No subcommands.
Default Values
By default, the DHCPv6 database is disabled.
Command History
Release R10.1.0 Command was introduced.
Usage Examples
The following example enables the DHCPv6 database:
(config)#ipv6 dhcp database local
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1188