ADTRAN AOS Version R10.1.0 Command Reference Manual page 161

Command Reference Guide
clear probe responder
Use the clear probe responder command to remove entries from the probe responders. Variations of this
command include:
clear probe responder counters
clear probe responder icmp-timestamp counters
clear probe responder twamp counters
clear probe responder udp-echo counters
Syntax Description
counters
icmp-timestamp
twamp
udp-echo
Default Values
No default values are necessary for this command.
Command History
Release 17.2
Usage Examples
The following example removes the TWAMP responder counters:
>enable
#clear probe responder twamp counters
60000CRG0-35E
Clears the probe responder counters.
Clears the Internet Control Message Protocol (ICMP) timestamp probe
responder counters.
Clears the Two-Way Active Measurement Protocol (TWAMP) probe
responder counters.
Clears the User Datagram Protocol (UDP) echo probe responder counters.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
161