ADTRAN AOS Version R10.1.0 Command Reference Manual page 145

Command Reference Guide Enable Mode Command Set
Usage Examples
The following example clears the Telnet association (TCP port 23) for IPv6 ACP pclass1 with source IPv6
address FE80::2AO:C8FF:FE61:3082 and destination IPv6 address 2003::2AO:C8FF:FE61:3084.
Because the source IPv6 address is a link-local address (FE80::), the appropriate interface (in this case
ethernet 0/1) must be entered after the source IPv6 address. Enter the command as follows:
>enable
#clear ipv6 policy-sessions pclass1 tcp FE80::2AO:C8FF:FE61:3082 ethernet 0/1
2003::2AO:C8FF:FE61:3084
The following example clears all IPv6 policy class sessions for the VRF instance named RED:
>enable
#clear ipv6 policy-sessions vrf RED
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 145