ADTRAN AOS Version R10.1.0 Command Reference Manual page 143

Command Reference Guide
clear ipv6 policy-sessions
Use the clear ipv6 policy-sessions command to clear Internet Protocol version 6 (IPv6) access control
policy (ACP) sessions from the firewall association database. Clearing a session typically terminates the
session's communication, therefore this command should be used carefully, particularly if the session is
one used for access to the command line interface (CLI). You may clear all the IPv6 sessions or a specific
IPv6 session. Use the show ipv6 policy-sessions command to view a current IPv6 session listing.
Variations of this command include:
clear ipv6 policy-sessions
clear ipv6 policy-sessions <ipv6 acp name> [ahp | esp | gre | <protocol>] <ipv6 source> [<interface>]
<ipv6 destination>
clear ipv6 policy-sessions <ipv6 acp name> [tcp | udp] <ipv6 source> [<interface>] <source port>
<ipv6 destination> <destination port>
clear ipv6 policy-sessions <ipv6 acp name> icmpv6 <ipv6 source> [<interface>] <id>
<ipv6 destination> <type/code>
clear ipv6 policy-sessions any-vrf
clear ipv6 policy-sessions pending
clear ipv6 policy-sessions pending any-vrf
clear ipv6 policy-sessions pending <ipv6 acp name> [ahp | esp | gre | <protocol>] <ipv6 source>
[<interface>] <ipv6 destination>
clear ipv6 policy-sessions pending <ipv6 acp name> [tcp | udp] <ipv6 source> [<interface>] <source
port> <ipv6 destination> <destination port>
clear ipv6 policy-sessions pending <ipv6 acp name> icmpv6 <ipv6 source> [<interface>] <id>
<ipv6 destination> <type/code>
clear ipv6 policy-sessions vrf <name>
clear ipv6 policy-sessions vrf <name> <ipv6 acp name> [ahp | esp | gre | <protocol>] <ipv6 source>
[<interface>] <ipv6 destination>
clear ipv6 policy-sessions vrf <name> <ipv6 acp name> [tcp | udp | <protocol>] <ipv6 source>
[<interface>] <source port> <ipv6 destination> <destination port>
clear ipv6 policy-sessions vrf <name> <ipv6 acp name> icmpv6 <ipv6 source> [<interface>] <id>
<ipv6 destination> <type/code>
Syntax Description
any-vrf
pending
<ipv6 acp name>
ahp
esp
gre
icmpv6
tcp
udp
60000CRG0-35E
Optional. Specifies that all sessions in all VPN routing and forwarding (VRF)
instances are cleared.
Optional. Specifies that any associations waiting on unknown traffic are
cleared.
Optional. Specifies the IPv6 ACP from which to clear the firewall sessions.
Specifies Authentication Header (AH) Protocol.
Specifies Encapsulating Security Payload (ESP) Protocol.
Specifies Generic Routing Encapsulation (GRE) Protocol.
Specifies Internet Control Message Protocol (ICMP) version 6 (ICMPv6).
Specifies Transmission Control Protocol (TCP).
Specifies User Datagram Protocol (UDP).
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
143