ADTRAN AOS Version R10.1.0 Command Reference Manual page 164

Command Reference Guide
clear qos map
Use the clear qos map command to clear the statistics for all defined quality of service (QoS) maps or for
maps meeting user-configured specifications. Variations of this command include the following:
clear qos map
clear qos map <name>
clear qos map <name> default
clear qos map <name> <number>
clear qos map interface <interface>
Syntax Description
<name>
<number>
default
interface <interface>
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Release A4.01
Release A5.01
Usage Examples
The following example clears statistics for all defined QoS maps:
#clear qos map
The following example clears statistics for all entries in the priority QoS map:
#clear qos map priority
The following example clears statistics in entry 10 of the priority QoS map:
60000CRG0-35E
Optional. Clears the statistics of a defined QoS map.
Optional. Clears the statistics for one of the map's specified sequence
numbers.
Optional. Clears the default QoS map entry.
Optional. Clears QoS map statistics for the specified interface. Specify an
interface in the format <interface type [slot/port | slot/port.subinterface id |
interface id | interface id.subinterface id | ap | ap/radio | ap/radio.vap]>. For
example, for a T1 interface, use t1 0/1; for an Ethernet subinterface, use
eth 0/1.1; for a PPP interface, use ppp 1; for an ATM subinterface, use
atm 1.1; and for a wireless virtual access point, use dot11ap 1/1.1.Type
clear qos map interface ? for a complete list of applicable interfaces.
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Command was expanded to include the default parameter and Ethernet
interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
164