ADTRAN AOS Version R10.1.0 Command Reference Manual page 138

Command Reference Guide
clear ipv6 cache
Use the clear ipv6 cache command to clear all the Internet Protocol version 6 (IPv6) route cache entries in
a given virtual private network (VPN) routing and forwarding (VRF) instance. Variations of this command
include:
clear ipv6 cache
clear ipv6 cache counters
clear ipv6 cache vrf <name>
clear ipv6 cache vrf <name> counters
Syntax Description
counters
vrf <name>
Default Values
No default values are necessary for this command.
Command History
Release 18.3
Usage Examples
The following example clears all the IPv6 route cache entries on the default VRF instance:
>enable
#clear ipv6 cache
60000CRG0-35E
Optional. Specifies that only the use-count statistics are cleared for each
IPv6 route cache entry.
Optional. Specifies a nondefault VRF instance on which to clear all the IPv6
route cache entries. If no VRF instance is specified, all entries on the default
VRF instance are cleared.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
138