ADTRAN AOS Version R10.1.0 Command Reference Manual page 140

Command Reference Guide
clear ipv6 dhcp conflict
Use the clear ipv6 dhcp conflict command to remove one or all of the Dynamic Host Control Protocol for
Internet Protocol version 6 (DHCPv6) server addresses that conflict. Variations of this command include:
clear ipv6 dhcp conflict *
clear ipv6 dhcp conflict <ipv6 address>
clear ipv6 dhcp conflict vrf <name> *
clear ipv6 dhcp conflict vrf <name> <ipv6 address>
Syntax Description
*
<ipv6 address>
vrf <name>
Default Values
No default values are necessary for this command.
Command History
Release R10.1.0
Usage Examples
The following example clears the DHCPv6 server conflict addresses on the default VRF instance for all
IPv6 addresses:
>enable
#clear ipv6 dhcp conflict *
60000CRG0-35E
Specifies that all IPv6 address conflicts are cleared.
Specifies that the conflicts for a single IPv6 address are cleared. IPv6
addresses should be expressed in colon hexadecimal format (X:X:X:X::X),
for example, 2001:DB8:1::1.
Optional. Specifies a nondefault VPN routing and forwarding (VRF) instance
from which to remove the conflicting address entries. If no VRF instance is
specified, the conflicting entries are cleared on the default VRF instance.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
140