ADTRAN AOS Version R10.1.0 Command Reference Manual page 155

Command Reference Guide
clear network-forensics ip dhcp
Use the clear network-forensics ip dhcp command to remove the Dynamic Host Configuration Protocol
(DHCP) statistics for clients connected to the network. Statistics can be cleared for a single client or for all
clients. Variations of this command include:
clear network-forensics ip dhcp
clear network-forensics ip dhcp hostname <hostname>
clear network-forensics ip dhcp interface gigabit-switchport <slot/port>
clear network-forensics ip dhcp ip <ip address>
clear network-forensics ip dhcp mac <mac address>
clear network-forensics ip dhcp vlan <vlan id>
Syntax Description
hostname <hostname>
interface gigabit-switchport <slot/port>
ip <ip address>
mac <mac address>
vlan <vlan id>
Default Values
No default values are necessary for this command.
Command History
Release 17.8
Usage Examples
The following example clears all collected DHCP statistics for all clients:
>enable
#clear network-forensics ip dhcp
60000CRG0-35E
Optional. Clears statistics for the client with the specified host
name.
Optional. Clears statistics for the client using the specified
interface.
Optional. Clears the statistics for the client with the specified
IP address. IP addresses should be expressed in dotted
decimal notation (for example, 10.10.10.1).
Optional. Clears the statistics for the client with the specified
medium access control (MAC) address. MAC addresses
should be expressed in the following format: xx:xx:xx:xx:xx:xx
(for example, 00:A0:C8:00:00:01).
Optional. Clears the statistics for the client with the specified
virtual local area network (VLAN) identification number.
VLAN IDs range from 1 to 4094.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
155