ADTRAN AOS Version R10.1.0 Command Reference Manual page 148

Command Reference Guide
clear ipv6 routers
Use the clear IPv6 routers command to clear the Internet Protocol version 6 (IPv6) list of routers learned
from router advertisement (RA) messages from locally reachable routers. Variations of this command
include:
clear ipv6 routers
clear ipv6 routers conflict
clear ipv6 routers <interface>
clear ipv6 routers <interface> conflict
clear ipv6 routers vrf <name>
clear ipv6 routers vrf <name> conflict
Syntax Description
conflict
<interface>
vrf <name>
Default Values
By default, all learned routers from all interfaces on the default VRF are cleared when no options are
specified.
Command History
Release 18.1
Release R10.1.0
Usage Examples
The following example specifies that learned routers are cleared from all interfaces on the default VRF:
>enable
#clear ipv6 routers
60000CRG0-35E
Optional. Specifies that learned routers with misconfigurations are cleared
from locally reachable routers.
Optional. Specifies an interface from which to clear the learned router list. If
no interface is specified, learned routers on all interfaces of the VPN routing
and forwarding (VRF) are cleared. Specify interfaces in the <interface>
<slot/port | interface id> format. For example, to specify a Point-to-Point
Protocol (PPP) interface, enter ppp 1. Enter clear ipv6 routers ? for a list
of available interfaces.
Optional. Specifies a VRF on which to clear learned routers. If no VRF is
specified, learned routers for all interfaces on the default VRF are cleared.
Command was introduced.
Command was expanded to include the tunnel interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
148