ADTRAN AOS Version R10.1.0 Command Reference Manual page 105

Command Reference Guide
clear counters voice-trunk
Use the clear counters voice-trunk command to reset counters on all voice trunks or on a specific voice
trunk. Variations of this command include:
clear counters voice-trunk all
clear counters voice-trunk <trunk id>
Syntax Description
all
<trunk id>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Usage Examples
The following example resets the counters for all configured voice trunks:
>enable
#clear counters voice-trunk all
60000CRG0-35E
Clears all voice trunk counters.
Specifies clearing a specific voice trunk using the trunk's two-digit identifier
following T (for example, T01).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
105