ADTRAN AOS Version R10.1.0 Command Reference Manual page 94

Command Reference Guide Enable Mode Command Set
clear buffers max-used
Use the clear buffers max-used command to clear the maximum-used statistics for buffers displayed in
the show memory heap command.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example clears the maximum-used buffer statics:
>enable
#clear buffers max-used
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 94