ADTRAN AOS Version R10.1.0 Command Reference Manual page 119

Command Reference Guide
clear ip dhcp binding
Use the clear ip dhcp binding command to clear Dynamic Host Configuration Protocol version 4
(DHCPv4) server binding entries. Variations of this command include:
clear ip dhcp binding *
clear ip dhcp binding <ipv4 address>
clear ip dhcp binding vrf <name> *
clear ip dhcp binding vrf <name> <ipv4 address>
Syntax Description
*
vrf <name>
<ipv4 address>
Default Values
No default values are necessary for this command.
Command History
Release 16.1
Release 17.1
Release 18.3
Release R10.1.0
Usage Examples
The following example clears all DHCPv4 server bindings on the default VRF:
>enable
#clear ip dhcp binding *
The following example clears all DHCPv4 server bindings from the VRF RED:
>enable
#clear ip dhcp binding vrf RED *
60000CRG0-35E
Clears all automatic DHCPv4 server binding entries.
Optional. Clears DHCPv4 server binding entries on the specified VPN
routing and forwarding (VRF) instance.
Clears a specific DHCPv4 server binding associated with an IPv4 address.
IPv4 addresses should be expressed in dotted decimal notation (for
example, 10.10.10.1).
Command was introduced.
Command was expanded to include the vrf parameter.
Command syntax was changed to remove the hyphen and the server
keyword for ADTRAN internetworking products.
Command syntax was changed to remove the hyphen and the server
keyword for ADTRAN voice products.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
119