Clear Host - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

clear host

Use the clear host command to clear a host name when using the domain naming system (DNS) proxy.
Variations of this command include:
clear host *
clear host <hostname>
clear host vrf <name> <hostname>
Syntax Description
*
<hostname>
vrf <name>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Release 16.1
Functional Notes
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
Usage Examples
The following example clears all dynamic host names:
>enable
#clear host *
60000CRG0-35E
Clears all hosts from the host table.
Clears a specific host entry from the host-to-address table.
Optional. Clears the host table entry for a specific VPN routing and
forwarding (VRF).
Command was introduced.
Command was expanded to include the vrf parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
116