ADTRAN AOS Version R10.1.0 Command Reference Manual page 113

Command Reference Guide
clear ethernet cfm mep remote
Use the clear ethernet cfm mep remote command to clear remote maintenance endpoint (MEP) entries
from the Ethernet operations, administration, and maintenance (OAM) connectivity fault management
(CFM) continuity check message (CCM) database. Variations of this command include:
clear ethernet cfm mep remote
clear ethernet cfm mep remote domain <domain name> association <association name>
clear ethernet cfm mep remote domain none association <association name>
clear ethernet cfm mep remote mep-id <mep id>
clear ethernet cfm mep remote remote-mep <mep id>
Syntax Description
domain <domain name>
domain none
association <association name> Optional. Specifies that only statistics for remote MEPs in the named
mep-id <mep id>
remote mep-id <mep id>
Default Values
No default values are necessary for this command.
Command History
Release 17.4
Functional Notes
For more information regarding Ethernet OAM CFM and its operation on AOS products, refer to the
Ethernet OAM CFM in AOS configuration guide available online at
(article number 3013).
Usage Examples
The following example clears all CCM entries for all remote MEPs:
>enable
#clear ethernet cfm mep remote
60000CRG0-35E
Optional. Specifies that only statistics for remote MEPs in the named
domain are cleared.
Optional. Specifies that no domain is named and all remote MEP
statistics, regardless of domain, are cleared.
association are cleared.
Optional. Specifies that only statistics for local MEPs with the specified
MEP ID are cleared. MEP ID range is 1 to 8191.
Optional. Specifies that only statistics for remote MEPs with the
specified MEP ID are cleared. MEP ID range is 1 to 8191.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
https://supportforums.adtran.com
113