Command Reference Guide
clear counters efm-group <group number>
Use the clear counters efm-group command to clear the counters of the specified Ethernet in the first mile
(EFM) group.
Syntax Description
<group number>
Default Values
No default values are necessary for this command.
Command History
Release A4.01
Usage Examples
The following example clears the counters for the EFM group 1:
>enable
#clear counters efm-group 1
60000CRG0-35E
Specifies the EFM group. Range is 1 to 1024.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
96