ADTRAN AOS Version R10.1.0 Command Reference Manual page 82

Command Reference Guide
shutdown
Use the shutdown command to disable the interface (both physical and virtual) so that no data will be
passed through. Use the no form of this command to turn on the interface and allow it to pass data. By
default, all interfaces are disabled.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are disabled.
Applicable Command Modes
Applies to all interface mode command sets.
Command History
Release 1.1
Usage Examples
The following example administratively disables the modem interface:
(config)#interface modem 1/2
(config-modem 1/2)#shutdown
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Common Commands
82