ADTRAN AOS Version R10.1.0 Command Reference Manual page 76

Command Reference Guide
fxo <slot/port>
fxs <slot/port>
gigabit-ethernet <slot/port>
hdlc <interface id>
hssi <slot/port>
loopback <interface id>
mef-ethernet <slot/port>
modem <slot/port>
port-channel <interface id>
ppp <interface id>
pri <slot/port>
serial <slot/port>
shdsl <slot/port>
switchport <slot/port>
t1 <slot/port>
60000CRG0-35E
Identifies foreign exchange office (FXO) interfaces. Slot and port
number ranges are dependent upon the hardware installed in the
unit. Type interface fxo ? for information regarding valid ranges.
Identifies foreign exchange station (FXS) interfaces. Slot and port
number ranges are dependent upon the hardware installed in the
unit. Type interface fxs ? for information regarding valid ranges.
Identifies gigabit Ethernet interfaces. Slot and port number ranges
are dependent upon the hardware installed in the unit. Type
interface gigabit-ethernet ? for information regarding valid
ranges.
Identifies and creates high level data link control (HDLC)
interfaces. Valid range is 1 to 1024.
Identifies high speed serial interfaces (HSSIs). Slot and port
number ranges are dependent upon the hardware installed in the
unit. Type interface hssi ? for information regarding valid ranges.
Identifies and creates loopback interfaces. Valid range is 1 to
1024.
Identifies Metro Ethernet Forum (MEF) Metro Ethernet interfaces.
Slot and port number ranges are dependent upon the hardware
installed in the unit.
Identifies analog modem interfaces. Slot and port number ranges
are dependent upon the hardware installed in the unit. Type
interface modem ? for information regarding valid ranges.
Creates and configures link aggregation interfaces. Valid range is
1 to 6.
Identifies and creates Point-to-Point Protocol (PPP) interfaces.
Valid range is 1 to 1024.
Identifies primary rate interfaces (PRIs). Slot and port number
ranges are dependent upon the hardware installed in the unit.
Type interface pri ? for information regarding valid ranges.
Identifies serial ports. Slot and port number ranges are dependent
upon the hardware installed in the unit. Type interface serial ? for
information regarding valid ranges.
Identifies single-pair high-speed digital subscriber lline (SHDSL)
interfaces. Slot and port number ranges are dependent upon the
hardware installed in the unit. Type interface shdsl ? for
information regarding valid ranges.
Identifies switchport interfaces. Slot and port number ranges are
dependent upon the hardware installed in the unit. Type interface
switchport ? for information regarding valid ranges.
Identifies T1 interfaces. Slot and port number ranges are
dependent upon the hardware installed in the unit. Type interface
t1 ? for information regarding valid ranges.
Copyright © 2012 ADTRAN, Inc.
Common Commands
76