Command Reference Guide
clear counters probe
Use the clear counters probe command to reset counters on all probe objects or on a specific probe.
Variations of this command include:
clear counters probe
clear counters probe <name>
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Usage Examples
The following example resets the counters for all configured probes:
>enable
#clear counters probe
The following example resets the counters only for the probe named probe_A:
>enable
#clear counters probe probe_A
60000CRG0-35E
Specifies a probe object to reset counter.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
101