ADTRAN AOS Version R10.1.0 Command Reference Manual page 102

Command Reference Guide
clear counters shdsl <slot/port> splice-detect
Use the clear counters shdsl splice-detect command to clear all bad splice detection test data for the
specified single-pair high-speed digital subscriber line (SHDSL) interface.
Syntax Description
<slot/port>
Default Values
No default values are necessary for this command.
Command History
Release A4.05
Usage Examples
The following example clears all bad splice detection test data associated with the SHDSL 1/1 interface:
>enable
#clear counters shdsl 1/1 splice-detect
60000CRG0-35E
Specifies the slot and port of the interface for which you want to clear the
test data.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
102