ADTRAN AOS Version R10.1.0 Command Reference Manual page 106

Command Reference Guide
clear crypto ike sa
Use the clear crypto ike sa command to clear existing Internet key exchange (IKE) security associations
(SAs). Use the policy and remote-id options to clear specific SAs without clearing them all. Variations of
this command include:
clear crypto ike sa
clear crypto ike sa peak
clear crypto ike sa policy <value>
clear crypto ike sa remote-id <remote id>
Syntax Description
peak
policy <value>
remote-id <remote id>
Default Values
No default values are necessary for this command.
Command History
Release 4.1
Release 12.1
Release 17.5
Usage Examples
The following example clears the entire database of IKE SAs (including the active associations):
>enable
#clear crypto ike sa
The following example clears IKE SAs associated with policy 101:
>enable
#clear crypto ike sa policy 101
The following example clears an IKE SA associated with remote-id netvanta:
>enable
#clear crypto ike sa remote-id netvanta
60000CRG0-35E
Optional. Clears the peak IKE SA count reached.
Optional. Removes all IKE SAs associated with the specified policy priority
value. This number is assigned using the command
Optional. Removes all IKE SAs associated with the specified IKE remote ID. A
delete payload is sent to the peers prior to deletion of the SA. This
command is preferred to the clear crypto ike sa policy <value> command
when multiple unique SAs have been created on the same IKE policy, but
the user wants to delete only the SA to a unique peer.
Command was introduced.
Command was expanded to include the policy and remote-id parameters.
Command was expanded to include the peak parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
crypto ike on page 920.
106