ADTRAN AOS Version R10.1.0 Command Reference Manual page 132

Command Reference Guide
clear ip rtp quality-monitoring
Use the clear ip rtp quality-monitoring command to clear all voice quality monitoring (VQM) statistics
or only VQM statistics from the call history or a particular interface. Variations of this command include:
clear ip rtp quality-monitoring
clear ip rtp quality-monitoring call-history
clear ip rtp quality-monitoring interface <interface>
Syntax Description
call-history
interface <interface>
Default Values
No default values are necessary for this command.
Command History
Release 17.1
Release A4.01
Usage Examples
The following example clears all VQM statistics from the call history:
>enable
#clear ip rtp quality-monitoring call-history
60000CRG0-35E
Optional. Removes call statistics from the call history only.
Optional. Clears all interface VQM statistics for the specified interface.
Specifies an interface in the format <interface type [slot/port |
slot/port.subinterface id | interface id | interface id.subinterface id | ap |
ap/radio | ap/radio.vap]>. For example, for a T1 interface, use t1 0/1; for an
Ethernet subinterface, use eth 0/1.1; for a PPP interface, use ppp 1; for an
ATM subinterface, use atm 1.1; and for a wireless virtual access point, use
dot11ap 1/1.1. Type clear ip rtp quality-monitoring interface ? for a valid
list of interfaces.
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
132