Clear Gvrp Statistics - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

clear gvrp statistics

Use the clear gvrp statistics command to clear counter statistics on GARP VLAN Registration Protocol
(GVRP) interfaces. Variations of this command include:
clear gvrp statistics all
clear gvrp statistics interface <interface>
Syntax Description
all
interface <interface>
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Usage Examples
The following example clears counter statistics on the GVRP interfaces:
>enable
#clear gvrp statistics all
60000CRG0-35E
Clears the information for all GVRP interfaces.
Clears the information for the specified interface. Specify an interface in the
format <interface type [slot/port | slot/port.subinterface id | interface id |
interface id.subinterface id | ap | ap/radio | ap/radio.vap]>. For example, for
a T1 interface, use t1 0/1; for an Ethernet subinterface, use eth 0/1.1; for a
PPP interface, use ppp 1; for an ATM subinterface, use atm 1.1; and for a
wireless virtual access point, use dot11ap 1/1.1. Type clear gvrp statistics
interface ? for a complete list of applicable interfaces.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
115