ADTRAN AOS Version R10.1.0 Command Reference Manual page 109

Command Reference Guide
clear desktop-auditing
Use the clear desktop-auditing command to remove the collected network access protection (NAP)
statistics for clients connected to the network. Statistics can be cleared for a single client or for all clients.
Variations of this command include:
clear desktop-auditing
clear desktop-auditing host <hostname>
clear desktop-auditing interface gigabit-switchport <slot/port>
clear desktop-auditing ip <ip address>
clear desktop-auditing mac <mac address>
clear desktop-auditing vlan <vlan id>
Syntax Description
host <hostname>
interface gigabit-switchport <slot/port>
ip <ip address>
mac <mac address>
vlan <vlan id>
Default Values
No default values are necessary for this command.
Command History
Release 17.8
Usage Examples
The following example clears all collected NAP statistics for all clients:
>enable
#clear desktop-auditing
60000CRG0-35E
Optional. Clears the statistics for the client with the specified
host name.
Optional. Clears the statistics for the client using the specified
interface.
Optional. Clears the statistics for the client with the specified
IP address. IP addresses should be expressed in dotted
decimal notation (for example, 10.10.10.1).
Optional. Clears the statistics for the client with the specified
medium access control (MAC) address. MAC addresses
should be expressed in the following format: xx:xx:xx:xx:xx:xx
(for example, 00:A0:C8:00:00:01).
Optional. Clears the statistics for the client with the specified
virtual local area network (VLAN) identification number.
VLAN IDs range from 1 to 4096.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
109