Clear Bgp - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

clear bgp

Use the clear bgp command to clear information for Internet Protocol version 4 (IPv4) or Internet Protocol
version 6 (IPv6) Border Gateway Protocol (BGP). You can clear BGP neighbors, BGP IPv4 and IPv6 route
information, and BGP connections on the default or nondefault VPN routing and forwarding (VRF)
instances. Variations of this command include:
clear bgp *
clear bgp <number>
clear bgp <ipv4 address>
clear bgp <ipv6 address>
clear bgp any-vrf [* | <number> | <ipv4 address>] [in | out | soft]
clear bgp any-vrf [* | <number> | <ipv6 address>] [in | out | soft]
clear bgp any-vrf ipv4 [* | <number> | <ipv4 address>] [in | out | soft]
clear bgp any-vrf ipv6 [* | <number> | <ipv6 address>] [in | out | soft]
clear bgp ipv4 [* | <number> | <ipv4 address>] [in | out | soft]
clear bgp ipv6 [* | <number> | <ipv6 address>] [in | out | soft]
clear bgp vrf <name> [* | <number> | <ipv4 address>] [in | out | soft]
clear bgp vrf <name> ipv4 [* | <number> | <ipv4 address>] [in | out | soft]
clear bgp vrf <name> ipv6 [* | <number> | <ipv6 address>] [in | out | soft]
Syntax Description
*
<number>
<ipv4 address>
<ipv6 address>
any-vrf
ipv4
ipv6
in
out
soft
vrf <name>
Default Values
No default values are necessary for this command.
60000CRG0-35E
Clears all BGP neighbors.
Clears all BGP neighbors with the specified autonomous system (AS)
number. Range is 1 to 4294967295.
Clears the BGP neighbor with the specified IPv4 address. IPv4 addresses
should be expressed in dotted decimal notation (for example, 10.10.10.1).
Clears the BGP neighbor with the specified IPv6 address. IPv6 addresses
should be expressed in colon hexadecimal format (for example,
2001:DB8:1::1).
Optional. Clears BGP connections for all VRF instances.
Optional. Clears all BGP IPv4 route information.
Optional. Clears all BGP IPv6 route information.
Causes a soft reset inbound with a neighbor, reprocessing routes
advertised by that neighbor.
Causes a soft reset outbound with a neighbor, resending advertised routes
to that neighbor.
Causes a soft reset both inbound and outbound.
Optional. Clears connections for a nondefault VRF instance.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
91