ADTRAN AOS Version R10.1.0 Command Reference Manual page 126

Command Reference Guide
<nat ipv4 address>
<nat port>
vrf <name>
Clearing pending ACP sessions may temporarily disrupt any applications that depend on
the presence of pending ACP sessions to allow the application traffic through the firewall.
Default Values
No default values are necessary for this command.
Command History
Release 2.1
Release 17.1
Release R10.1.0
Functional Notes
The second half of this command, beginning with the source IPv4 address, may be copied and pasted
from a row in the show ip policy-sessions table for easier use.
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
Usage Examples
The following example clears the Telnet association (TCP port 23) for an IPv4 policy class PCLASS1 with
source IPv4 address 192.22.71.50 and destination 192.22.71.130:
>enable
#clear ip policy-sessions PCLASS1 tcp 192.22.71.50 23 192.22.71.130 23
The following example clears all IPv4 policy class sessions for the VRF instance named RED:
>enable
#clear ip policy-sessions vrf RED
60000CRG0-35E
For NAT sessions, this specifies the NAT IP address. IP addresses should
be expressed in dotted decimal notation (for example, 10.10.10.1).
For NAT sessions, this specifies the NAT port (in hex format for AH, ESP,
and GRE; decimal for all other protocols).
Optional. Specifies the VRF instance to impact. Executing the above
mentioned commands without specifying a VRF will only affect the default
unnamed VRF.
Command was introduced.
Command was expanded to include the vrf and any-vrf parameters.
Command was expanded to include the pending parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
126