ADTRAN AOS Version R10.1.0 Command Reference Manual page 73

Command Reference Guide
exit
Use the exit command to exit the current configuration mode and enter the previous one. For example,
using the exit command in an interface configuration mode will activate the Global Configuration mode.
When using the exit command in the Basic mode, the current session will be terminated.
When exiting the Global Configuration mode, remember to perform a copy
running-config startup-config to save all configuration changes.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Applicable Command Modes
Applies to all mode command sets.
Command History
Release 1.1
Usage Examples
The following example shows the exit command being executed in the Global Configuration mode:
(config)#exit
#
#- Enable Security mode command prompt
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Common Commands
73