ADTRAN AOS Version R10.1.0 Command Reference Manual page 104

Command Reference Guide
clear counters vlan <vlan id>
Use the clear counters vlan command to reset counters on the specified virtual local area network
(VLAN) interface.
Syntax Description
<vlan id>
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Usage Examples
The following example resets the counters on VLAN interface 7:
>enable
#clear counters vlan 7
60000CRG0-35E
Specifies a valid VLAN interface ID. Range is 1 to 4094.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
104