ADTRAN AOS Version R10.1.0 Command Reference Manual page 72

Command Reference Guide
end
Use the end command to exit the current configuration mode and enter the Enable Security mode.
When exiting the Global Configuration mode, remember to perform a copy
running-config startup-config to save all configuration changes.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Applicable Command Modes
Applies to all mode command sets except Basic mode.
Command History
Release 1.1
Usage Examples
The following example shows the end command being executed in the T1 Interface Configuration mode:
(config-t1 1/1)#end
#
#- Enable Security mode command prompt
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Common Commands
72