ADTRAN AOS Version R10.1.0 Command Reference Manual page 78

Command Reference Guide Common Commands
Usage Examples
The following example uses the interface command to navigate from the T1 Interface Configuration mode
to a Frame Relay interface:
(config)#interface t1 1/1
(config-t1 1/1)#interface fr 7
(config-fr 7)#
The following examples activate the interface configuration mode for the specified interface type:
For an ADSL interface:
(config)#interface adsl 1/1
(config-adsl 1/1)#
For an ATM subinterface:
(config)#interface atm 1.1
(config-atm 1.1)#
For a BRI interface:
(config)#interface bri 1/2
(config-bri 1/2)#
For a BVI interface:
(config)#bridge irb
(config)#interface bvi 1
(config-bvi 1)#
For a cellular interface:
(config)#interface cellular 1/1
(config-cellular 1/1)#
For a DDS interface:
(config)#interface dds 1/1
(config-dds 1/1)#
For a demand interface:
(config)#interface demand 1
(config-demand 1)#
For a dot11ap interface:
(config)#interface dot11ap 1
(config-dot11ap 1)#
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 78