ADTRAN AOS Version R10.1.0 Command Reference Manual page 97

Command Reference Guide
clear counters ethernet cfm
Use the clear counters ethernet cfm command to clear all statistics held by Ethernet operations,
administration, and maintenance (OAM) connectivity fault management (CFM) maintenance endpoints
(MEPs). Variations of this command include:
clear counters ethernet cfm
clear counters ethernet cfm domain <domain name> association <association name>
clear counters ethernet cfm domain none association <association name>
clear counters ethernet cfm interface <interface>
clear counters ethernet cfm level <level>
clear counters ethernet cfm mep-id <mep id>
Syntax Description
domain <domain name>
domain none
association <association name> Optional. Specifies that only statistics for MEPs in the named
interface <interface>
level <level>
mep-id <mep id>
Default Values
No default values necessary for this command.
Command History
Release 17.4
Release A4.01
Release A5.01
Functional Notes
For more information regarding Ethernet OAM CFM and its operation on AOS products, refer to the
Ethernet OAM CFM in AOS configuration guide available online at
(article number 3013).
60000CRG0-35E
Optional. Specifies that only statistics for MEPs in the named domain
are cleared.
Optional. Specifies that no domain is named and all MEP statistics,
regardless of domain, are cleared.
association are cleared.
Optional. Specifies that only statistics for MEPs configured on the
specified interface are cleared. Specify an interface in the format
<interface type [slot/port | slot/port.subinterface id | interface id |
interface id.subinterface id]>. For example, for an Ethernet
subinterface, use eth 0/1.1. For a list of appropriate interface, enter
interface ? at the prompt.
Optional. Specifies that only statistics for MEPs within the specified
maintenance domain level are cleared. Level range is 0 to 7.
Optional. Specifies that only statistics for MEPs with the specified MEP
ID are cleared. MEP ID range is 1 to 8191.
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Command was expanded to include the Gigabit Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
https://supportforums.adtran.com
97