ADTRAN AOS Version R10.1.0 Command Reference Manual page 1215

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
ipv6 policy-class <ipv6 acp name>
Use the ipv6 policy-class command to create an Internet Protocol version 6 (IPv6) access control policy
(ACP) and enter the ACP configuration mode. Use the no form of this command to delete an IPv6 ACP
and all the entries it contains. Each ACP can contain up to 20 entries. For more information, refer to the
IPv6 Access Control Policy Command Set on page
Configured IPv6 ACPs will only be active if the command
been entered at the Global Configuration mode prompt to enable the AOS IPv6 security
features. All configuration parameters are valid, but no security data processing will be
attempted unless the security features are enabled.
Before applying an ACP to an interface, verify your Telnet or secure shell (SSH)
connection will not be affected by the policy. If an ACP is applied to the interface you are
connecting through and it does not allow Telnet or SSH traffic, your connection will be
lost.
Syntax Description
<ipv6 acp name>
Default Values
By default, there are no configured IPv6 ACPs.
Command History
Release 18.1
Functional Notes
AOS IPv6 ACPs are used to allow or discard data for each physical interface. Each IPv6 ACP consists of
an action (allow, discard) and a selector IPv6 access control list (ACL). When IPv6 packets are received
on an interface, the configured IPv6 ACPs are applied to determine whether the data will be processed or
discarded.
IPv6 ACPs only work with IPv6 ACLs, and IPv4 ACPs only work with IPv4 ACLs. You cannot have an IPv6
ACP or ACL with the same name as an IPv4 ACP or ACL.
Usage Examples
The following example creates an IPv6 ACP named PRIVATEv6:
(config)#ip policy-class PRIVATEv6
(config-policy6-class)#
60000CRG0-35E
3192.
Identifies the configured IPv6 ACP using an alphanumeric descriptor
(maximum of 50 characters). All ACP descriptors are case sensitive.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ipv6 firewall on page 1193
has
1215

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents