ADTRAN AOS Version R10.1.0 Command Reference Manual page 1191

Command Reference Guide
ipv6 dhcp ping timeout <value>
Use the ipv6 dhcp ping timeout command to specify the interval the Dynamic Host Control Protocol
version 6 (DHCPv6) server waits for a response to a transmitted DHCPv6 ping packet when testing an
Internet Protocol version 6 (IPv6) packet. Use the no form of this command to return the timeout period to
the default value.
Syntax Description
<value>
Default Values
By default, the DHCPv6 server waits 500 ms for a ping response when testing an IPv6 address.
Command History
Release R10.1.0
Usage Examples
The following example specifies the ping timeout value for the DHCPv6 server is 300 ms:
(config)#ipv6 dhcp ping timeout 300
60000CRG0-35E
Specifies the DHCPv6 ping timeout value in milliseconds. Valid range is 10
to 1000 ms.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1191