ADTRAN AOS Version R10.1.0 Command Reference Manual page 1193

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
ipv6 firewall
Use the ipv6 firewall command to enable AOS Internet Protocol version 6 (IPv6) security features,
including IPv6 access control policies (ACPs) and lists (ACLs) and the stateful inspection firewall. Use the
no form of this command to disable the IPv6 security functionality. Variations of this command include:
ipv6 firewall
ipv6 firewall vrf <name>
Disabling the AOS IPv6 security features (using the no ipv6 firewall command) does not
affect security configuration. All configuration parameters will remain intact, but no
security data processing will be attempted.
Syntax Description
vrf <name>
Default Values
By default, all AOS IPv6 security features are disabled.
Command History
Release 18.1
Usage Examples
The following example enables the AOS IPv6 security features:
(config)#ipv6 firewall
60000CRG0-35E
Optional. Enables or disables the IPv6 firewall for a specific VPN routing
and forwarding (VRF) instance.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1193

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents