ADTRAN AOS Version R10.1.0 Command Reference Manual page 1211

Command Reference Guide
ipv6 firewall stealth
Use the ipv6 firewall stealth command to place the Internet Protocol version 6 (IPv6) firewall in stealth
mode. The stealth setting allows the route to be invisible as a route hop to associated devices. Use the no
form of this command to disable the stealth feature. Variations of this command include:
ipv6 firewall stealth
ipv6 firewall vrf <name> stealth
The AOS IPv6 firewall must be enabled (using the command
for the stateful inspection firewall to be activated.
Syntax Description
vrf <name>
Default Values
By default, stealth mode is disabled.
Command History
Release 18.1
Usage Examples
The following example enables the stealth option for the default IPv6 VRF:
(config)#ipv6 firewall stealth
60000CRG0-35E
Optional. Specifies a VPN routing and forwarding (VRF) instance to put in
stealth mode. If no VRF is specified, the default VRF is placed in stealth
mode.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ipv6 firewall on page 1193)
1211