ADTRAN AOS Version R10.1.0 Command Reference Manual page 1200

Command Reference Guide
ipv6 firewall check min-fragment-size <value>
Use the ipv6 firewall check min-fragment-size command to specify the smallest permitted size for
Internet Protocol version 6 (IPv6) fragmented packets. Packets less than the specified size are dropped.
Use the no form of this command to return to the default value. Variations of this command include:
ipv6 firewall check min-fragment-size <value>
ipv6 firewall vrf <name> check min-fragment-size <value>
The AOS IPv6 firewall must be enabled (using the command
for the stateful inspection firewall to be activated.
Syntax Description
<value>
vrf <name>
Default Values
By default, the IPv6 packet fragment size is set to 640 octets.
Command History
Release 18.1
Usage Examples
The following example changes the smallest permitted size for IPv6 packet fragments on the default VRF
to 800 octets:
(config)#ipv6 firewall check min-fragment-size 800
60000CRG0-35E
Specifies the packet size in octets. Valid range is 56 to 1280 octets.
Optional. Specifies a VPN routing and forwarding (VRF) instance to
configure. If no VRF is specified, the default VRF is configured.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ipv6 firewall on page 1193)
1200