Table of Contents
Advertisement
Command Reference Guide
line
Use the line command to enter the line configuration for the specified console, Telnet, or secure shell
(SSH) session. Refer to the sections
Interface Command Set on page
information on the subcommands. Variations of this command include:
line console <line number>
line ssh <line number>
line ssh <line number> <ending number>
line telnet <line number>
line telnet <line number> <ending number>
Syntax Description
console
telnet
ssh
<line number>
<ending number>
Default Values
By default, there are no configured Telnet or SSH sessions. By default, the AOS line console parameters
are configured as follows:
Data Rate: 9600
Data bits: 8
Stop bits: 1
Parity Bits: 0
No flow control
Command History
Release 1.1
60000CRG0-35E
Line (Console) Interface Command Set on page
1498, and
Line (SSH) Interface Command Set on page 1481
Enters the configuration mode for the DB-9 (female) CONSOLE port located on
the rear panel of the unit. Refer to the section
Command Set on page 1464
that command set.
Enters the configuration mode for Telnet session(s), allowing you to configure
for remote access. Refer to the section
on page 1498
for information on the subcommands found in that command
set.
Enters the configuration mode for SSH. Refer to the section
Interface Command Set on page 1481
found in that command set.
Specifies the starting session to configure for remote access. Valid range for
console is 0. Valid range for Telnet and SSH is 0 to 4.
If configuring a single Telnet or SSH session, enter a single line number.
Optional. Specifies the last Telnet or SSH session to configure for remote
access. Valid range is 0 to 4.
For example, to configure all available Telnet sessions, enter line telnet
0 4.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
Line (Console) Interface
for information on the subcommands found in
Line (Telnet) Interface Command Set
for information on the subcommands
1464,
Line (Telnet)
for
Line (SSH)
1231
Advertisement
Table of Contents
