ADTRAN AOS Version R10.1.0 Command Reference Manual page 1296

Command Reference Guide
qos map <name> <number>
Use the qos map command to create a quality of service (QoS) map and activate the QoS Map Command
Set (which allows you to edit a QoS map). For details on specific commands, refer to the
Map Command Set on page
this command include:
qos map <name> <number>
qos map <name> <number> match-all
qos map <name> <number> match-any
Syntax Description
<name>
<number>
match-all
match-any
Default Values
By default, there are no QoS maps defined. Once created, the default behavior is to match any of the
conditions set for the QoS map.
Command History
Release 6.1
Release 17.2
Functional Notes
AOS uses QoS maps to classify packets into groups for matching. A QoS map contains multiple class
entries, each of which has packet match cases, and a set of actions for the particular group (actions are
defined by bandwidth, priority, set, and shape commands). Multiple map entries for the same QoS map
are differentiated by a sequence number. The sequence number is used to assign the order in which the
conditions are matched.
Once created, a QoS map must be applied to an interface (using the qos-policy out command) in order to
actively process traffic. Refer to
interface. Any traffic for the interface that is not sent to the priority queue is sent using the default queuing
method for the interface (such as weighted fair queuing (WFQ)).
60000CRG0-35E
3269. Use the no form of this command to delete a map entry. Variations of
Specifies the QoS map name.
Assigns a sequence number to differentiate this QoS map and provide a
match order. Valid range is 0 to 65535.
Optional. Indicates the traffic must match all conditions before the set action
is issued.
Optional. Indicates the traffic can match any of the conditions to be
processed, which is the default behavior.
Command was introduced.
Command was expanded to include the match-all and match-any
parameters.
qos-policy on page 1699
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
for more information on assigning the map to an
Quality of Service
1296