ADTRAN AOS Version R10.1.0 Command Reference Manual page 1260

Command Reference Guide
mef evc <name>
Use the mef evc command to create an Ethernet virtual connection (EVC) and enter the EVC configuration
mode. Using the no form of this command removes the EVC from the AOS unit's configuration.
Syntax Description
<name>
Default Values
By default, no EVCs are configured.
Command History
Release A4.01
Functional Notes
The EVC connects two endpoints (for example, an Ethernet in the first mile (EFM) group and the Metro
Ethernet Forum (MEF) Ethernet interface) and passes Ethernet service frames though the endpoints. The
EVCs prevent data transfer between subscriber sites that are not part of the same EVC, thus providing
data privacy and security similar to a Frame Relay or an asynchronous transfer mode (ATM) permanent
virtual circuit (PVC). EVCs are configured to be part of a bonding group (EFM group).
More information about the configuration of EVCs can be found in the
3213 or in the Configuring EFM NIM2s and the MEF Ethernet Interface in AOS configuration guide
available online at https://supportforums.adtran.com.
Usage Examples
The following example creates an EVC named DATA and enters the EVC configuration mode:
(config)#mef evc DATA
(config-evc-DATA)#
60000CRG0-35E
Specifies the name for the EVC.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
MEF EVC Command Set on page
1260