ADTRAN AOS Version R10.1.0 Command Reference Manual page 1261

Command Reference Guide
mef evc-map <name>
Use the mef evc-map command to create a Metro Ethernet Forum (MEF) Ethernet virtual connection
(EVC) map and enter the EVC Map Configuration mode. The EVC map is used to match traffic to a
specific EVC using matching criteria similar to that of quality of service (QoS) matching. Using the no
form of this command removes the EVC map from the AOS unit's configuration.
Syntax Description
<name>
Default Values
By default, no EVC maps are configured.
Command History
Release A4.01
Functional Notes
Once an EVC map is created, it must be configured and applied to both an EVC and a user network
interface (UNI). For more information about the configuration of EVC maps, refer to
Command Set on page 3217
configuration guide available online at https://supportforums.adtran.com.
Usage Examples
The following example creates the EVC map Map1 and enters the EVC Map Configuration mode:
(config)#mef evc-map Map1
(config-evc-map-Map1)#
60000CRG0-35E
Specifies the name of the EVC map.
Command was introduced.
or the Configuring EFM NIM2s and the MEF Ethernet Interface in AOS
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
MEF EVC Map
1261