ADTRAN AOS Version R10.1.0 Command Reference Manual page 1262

Command Reference Guide
mef policer <name>
Use the mef policer command to create a Metro Ethernet Forum (MEF) policer policy and enter the MEF
Policer Policy Configuration mode. The EVC policer policy limits the amount of traffic outbound from the
AOS unit to the Metro Ethernet network (MEN). Using the no form of this command removes the MEF
policer policy from the AOS unit's configuration.
Syntax Description
<name>
Default Values
By default, no MEF policer policies are configured.
Command History
Release A4.01
Functional Notes
The EVC policer policy can limit traffic on Ethernet virtual connections (EVCs), user network interfaces
(UNIs), or EVC maps based on traffic committed burst size (CBS), committed information rate (CIR),
excess burst size (EBS), and excess information rate (EIR). These thresholds are used to determine when
the EVC bandwidth usage is too great, and the traffic is either queued or dropped based on the configured
thresholds. For more information about the configuration and use of EVC policer policies, refer to
Policer Policy Command Set on page 3223
in AOS configuration guide available online at
Usage Examples
The following example creates the MEF policer policy Policy1 and enters the MEF Policer Policy
Configuration mode:
(config)#mef policer Policy1
(config-policer-Policy1)#
60000CRG0-35E
Specifies the name of the MEF policer policy.
Command was introduced.
or the Configuring EFM NIM2s and the MEF Ethernet Interface
https://supportforums.adtran.com.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
MEF
1262