Command Reference Guide
Global Configuration Mode Command Set
Functional Notes
The MEF QoS CoS map values are used by the EVC map when the MEN queue setting is specified as
inherit. For more information about the relationships between and configuration of MEF components, refer
to the Configuring EFM NIM2s and the MEF Ethernet Interface in AOS configuration guide available online
at
https://supportforums.adtran.com.
Usage Examples
The following example specifies that traffic with CoS values 3 and 4 are mapped to queue 1:
(config)#mef qos cos-map 1 3 4
The following example specifies the MEN priority for untagged traffic is 5:
(config)#mef qos untagged 5
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1264