ADTRAN AOS Version R10.1.0 Command Reference Manual page 1255

Command Reference Guide
mac address-table aging-time <value>
Use the mac address-table aging-time command to set the length of time dynamic medium access control
(MAC) addresses remain in the switch or bridge forwarding table. Use the no form of this command to
reset this length to the default setting.
Syntax Description
<value>
Default Values
By default, the aging time is 300 seconds.
Command History
Release 5.1
Usage Examples
The following example sets the aging time to 10 minutes:
(config)#mac address-table aging-time 600
60000CRG0-35E
Sets an aging time in seconds. Range is 10 to 1000000 seconds. Set to 0 to
disable the timeout.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1255