ADTRAN AOS Version R10.1.0 Command Reference Manual page 1285

Command Reference Guide
port-auth max-req <number>
Use the port-auth max-req command to specify the maximum number of identity requests the
authenticator will transmit before restarting the authentication process. Use the no form of this command
to return to the default setting.
Syntax Description
<number>
Default Values
By default, the maximum number of authentication requests is set at 2.
Command History
Release 10.1
Usage Examples
The following example sets the maximum number of authentication requests at 4:
(config)#port-auth max-req 4
60000CRG0-35E
Specifies the maximum number of authentication requests.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1285