Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
network-forensics ip dhcp
Use the network-forensics ip dhcp command to enable passive monitoring of Dynamic Host
Configuration Protocol (DHCP) message exchanges between the server and the client. Using the no form
of this command disables network forensics.
Syntax Description
No subcommands.
Default Values
By default, this feature is disabled.
Command History
Release 17.8
Command was introduced.
Functional Notes
Network forensics is an AOS feature that collects client information through DHCP messages sent
between clients connected to the network and the network server.
Once network forensics is enabled, the AOS unit begins collecting DHCP information. The collected data
can be viewed either by using the command
show name-server on page 682
or
debug network-forensics ip
dhcp on page 338
to view the information in realtime. For more information about network forensics, refer
to the Network Forensics in AOS troubleshooting guide available online at
https://supportforums.adtran.com.
Usage Examples
The following example enables the network forensics feature:
(config)#network-forensics ip dhcp
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1272
Advertisement
Table of Contents
