ADTRAN AOS Version R10.1.0 Command Reference Manual page 1286

Command Reference Guide Global Configuration Mode Command Set
port-auth re-authentication
Use the port-auth re-authentication command to enable re-authentication. Use the no form of this
command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, re-authentication is disabled.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example enables re-authentication:
(config)#port-auth re-authentication
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1286