ADTRAN AOS Version R10.1.0 Command Reference Manual page 1274

Command Reference Guide
ntp max-associations <value>
Use the ntp max-associations command to set the maximum number of simultaneous Network Time
Protocol (NTP) associations allowed with other NTP clients or peers. Use the no form of this command to
return to the default setting.
Syntax Description
<value>
Default Values
By default, the maximum associations is 100.
Command History
Release 17.2
Usage Examples
The following example specifies the maximum associations of 250:
(config)#ntp max-associations 250
60000CRG0-35E
Specify the maximum number of associations. The valid range is
1 to 4294967295.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1274