ADTRAN AOS Version R10.1.0 Command Reference Manual page 1288

Command Reference Guide
port-auth timeout
Use the port-auth timeout command to configure various port authentication timers. Use the no form of
this command to return to the default setting. Variations of this command include:
port-auth timeout quiet-period <value>
port-auth timeout re-authperiod <value>
port-auth timeout tx-period <value>
Syntax Description
quiet-period <value>
re-authperiod <value>
tx-period <value>
Default Values
By default, quiet-period is set to 60 seconds, re-authperiod is set to 3600 seconds (1 hour), and
tx-period is set to 30 seconds.
Command History
Release 10.1
Usage Examples
The following example sets the quiet-period to 10 seconds:
(config)#port-auth timeout quiet-period 10
60000CRG0-35E
Specifies the amount of time the system will wait before attempting another
authentication once a failure has occurred. Range is 1 to 65535 seconds.
Specifies the amount of time between scheduled re-authentication
attempts. Range is 1 to 4294967295 seconds.
Specifies the amount of time the authenticator will wait between identity
requests. Range is 1 to 65535 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1288